Cut the panels (horizontally) into strips short enough (vertically) to slip between the limbs and the top of the posts. Stack as many strips as needed to get the full height. So if you have 2 feet of clearance and 6 foot tall panels, cut them in to 3 strips, insert each strip. If you have 3 feet of clearance, cut them in half. The cleats simply slot into the fence post using two holes located near the bottom of the fence post and then the gravel board is bolted onto the cleat, usually using bolts. Some concrete fence posts have four holes is to allow a choice of position. This guide shows you how to easily erect your own fence. This guide might look like its from the 80s, but the advice is still sound and you can't beat those. Lay your gravel boards on the ground between your posts. Make sure they slot into the grooves of the posts. Slot you Fence Panels into your Slotted Concrete Posts. You should be able to slot each of the fence panels between the concrete posts, from above. It is best to get someone to help you lift the fence panels into place.

1. How To Slot Fence Panels Into Concrete Posts At Home Depot
2. How To Slot Fence Panels Into Concrete Posts Post
3. How To Slot Fence Panels Into Concrete Posts Home Depot

Ask a tradesman

Landscape Gardening

I will attempt to explain this in as much detail as possible so not to find repeat answers I have found on the internet.

I currently have an old wire fence, I would like to replace this with wooden panels without having to replace the existing concrete posts.

The concrete posts:
- Do not have grooves to slot panels into
- Do not have forward facing holes (e.g. wouldn't be able to attach a panel to the front, drill through the wood and bolt either side)
- Have some holes on the sides of the posts (where the wire links through the concrete post to the next section)
- When I have seen these described online it has more so been boundary markers than fencing posts

I will not have the means to drill in new holes - is there a way to attach new wooden panels to what currently exists? What would I need to look for in a wooden panel to achieve this? What screws/bolts will I need? Could I attach something horizontally somehow - then attach the wooden fencing panels to this instead of the posts?

Any advice or guidance would be greatly appreciated!

5

5 Answers from MyBuilder Landscape Gardeners

Best Answer

60166

You could fix timber to the existing concrete posts using the existing wire holes. Then run panels across the front using the timber to fix to.
Or run additional timber across these to form a framework to attach the fence panels to.
You could also run timber rails across the timber on the posts and attach gravel boards and featheredge fencing to the rails.

2017-07-18T20:35:01+01:00

Answered 18th Jul 2017

78151

you can actually put some timber in between the posters and screw them together then place the panels back you might have to make some adjustments also ,( when I said you can put some timber between the posters I mean where the panels go in gap so that’s why you put the timber) you can timber up across and then feather hedge gravel boards .you can timber up in front of the concrete so it looks like you’ve got a complete wooden fence, the choice is totally up to you

2019-01-13T14:35:02+00:00

Answered 13th Jan 2019

93716

You can attach fencing rails vertically inside the posts with bolts through the holes where wire went through then placing rails close to the front edge of the concrete posts attach fence rails to them horizontally with screws then attach your fence panels

2019-09-04T14:40:02+01:00

Answered 4th Sep 2019

100982

I personally have came across this many times before, I would use 4x2 treated timber to either make framework for feather edge fencing or to screw whole fence panels onto. I would use raw plugs and screws to fix to the existing concrete posts to avoid removing the concrete post which you already have. Either one of these methods allows you to use a gravel board, also trellis at the top if desired.
If you want hole fence panels placed within the gaps they would need a slight bit of alteration possibly depending on how far apart the concrete post are from each other once treated timber has been put in place. You may have no choice but to use feather edge fencing if the gaps are more than ready made panels.
I hope my resolutions have been of some use to yourself today and I wish you the best of luck. Thanks again for asking your question.

2019-12-09T10:50:02+00:00

Answered 9th Dec 2019

91938

I would attach a 4x2 rail to the concrete post (bolt or if they have holes plug and screews) then feather board it that will give you best results

2019-08-11T08:50:02+01:00

Answered 11th Aug 2019

Related Questions

• How much work do I need to do to be 'Satisfactory'

  In order to satisfy my home insurance company, I recently had a NICEIC inspection on my recently purchased house (that I will be...

• Can I attach a new fence to existing spurs?

  The old fence between my garden and next door's needs replacing, it must be many years old consisting of tapered vertical boards...

• Replacing an existing lean-to garden room

  I'm looking for suggestions for how best to proceed with rennovating an existing lean-to structure at the side of our house which...

• Repositioning Concrete Fence Posts due to Neighbour's Extension

  UPDATE - Thanks for the advice guys! I also sought some legal consultation and they agreed that the fence currently dictates the...

This is a very common question and something that we’re frequently asked especially when people are undertaking DIY fencing or DIY gate renovations, or landscaping projects. The simple answer is YES – we can absolutely install fencing and gates into brick paving or concrete.

There are a couple of different ways this can be done which will be explained below. But first, it is important to understanding a couple of things.

Whenever you are installing fencing or gates it is extremely important that the foundations or footings of the posts are appropriate. The appropriate size of a post footing is dependent on several factors, including the load it will bear, the site conditions (i.e. how windy the area is), and the type of soil in the area (sandy soil vs firm ground).

As a rule of thumb, we want the post to be at least 600mm under the ground with a substantial concrete footing. The details of a typical post footing can be found in our brochure. It is extremely important, especially when installing gates, that the footing size is correct as this will ensure the gates do not drop or sag over time.

When installing fencing or gates into paving or concrete, there are two main installing options:

1. Core drilling into paving or concrete.
2. Bolting post with a base plate into the finished flooring.

Option 1: Core drilling through finished paving or concrete.

The preferred option when installing fencing or gates into paving or concrete is to use a core drill. The core drill is a highly efficient and powerful tool for boring holes through reinforced concrete, blocks, brick, masonry and stone.

Core drilling is one of the most effective, non-vibratory ways of drilling through reinforced and non-reinforced concrete or masonry substrates. It creates holes without causing aggressive demolition or too much strain. It is always preferable to use a Diamond tip core bit as this ensures a neat and clean hole through all types of reinforced and non-reinforced concrete, block work and bricks.

The core drilling procedure is most effective in getting precise and accurate circular cuts through varied concrete surfaces.

Once the core hole is drilled, sand is removed to the required depth, the post is inserted and the concreted poured in place. To ensure a seamless job is achieved, post hole covers can be added to hide the core hole and ensure a clean finish is achieved.

Option 2 – bolting post with a base plate into paving or concrete.

How To Slot Fence Panels Into Concrete Posts At Home Depot

Sometimes core drilling is not possible or appropriate, these situations can include,

• Installing fencing on top of a timber deck,
• Installing into tiles (tiles can easily chip when core drilled)
• Where there is a strong chance of existing underground services.

How To Slot Fence Panels Into Concrete Posts Post

In these situations, we recommend a post with a base plate be used. When using this method, it is important to ensure the surface we are bolting a post into is strong enough to support the fencing or gates we are installing. An array of fixing procedures can be used and wherever possible a construction adhesive like chemi-anchor will be used.

How To Slot Fence Panels Into Concrete Posts Home Depot

As you can see, it is possible to install fencing and gates into brick paving or concrete. In fact, it is our preference that you install paving or concrete first, especially with pool fencing, as the finished floor level is then known and we can ensure the installed fence meets with pool fencing height requirements as per AUS/NZ 1926.1 -2012.

If you have any questions regarding the best way to install fencing or gates for your project, please do not hesitate to contact us or arrange a site visit from one of our sales consultants so they can provide you with a no-obligation quote.